Center for Materials and Manufacturing Sciences Faculty and Staff | 番茄社区

番茄社区

Faculty and Staff

Get to know our Faculty and Staff

Dr. Raj Vinnakota

Dr. Raj K Vinnakota


Interim Director of the CMMS
Assistant Professor & EET Program Coordinator
番茄社区
123 Center for Materials and Manufacturing Sciences (CMMS)
Troy, AL 36082

rvinnakota@troy.edu 
Telephone: 334-808-6277
http://spectrum.troy.edu/rvinnakota/

Dr. Vinnakota is an Assistant Professor and Associate Chair in the Department of Chemistry and Physics at 番茄社区, where he also coordinates the Electronics Engineering Technology program. He is currently serving as the Interim Director for the Center for Materials and Manufacturing Sciences (CMMS). Dr. Vinnakota joined 番茄社区 in 2020 and holds a Ph.D. in Engineering (Engineering Physics concentration) from Louisiana Tech University, along with master's degrees in Microsystems Engineering, Applied Physics, and Electrical Engineering. Following his doctorate, he conducted postdoctoral research at Louisiana Tech University's Computational Electromagnetism Research Lab (CERL) and the Institute for Micromanufacturing (IFM), gaining extensive experience in cutting-edge technologies. His research interests include:  Novel Optoelectronic Devices, Metal and Semiconductor based Plasmonics and enhanced light matter interactions, Nanophotonics, Heat Transfer. 

Dr. Zhiyong Wang

Dr. Zhiyong Wang

Associate Professor of Chemistry
Chair, Dept. of Chemistry and Physics
番茄社区
315 McCall Hall (MSCX)
Troy, AL 36082


wangz@troy.edu
Telephone: 334-670-3573

His current research interest is in using Organic Chemistry as a tool to explore two areas: 1) The rational construction of metal-organic frameworks (MOFs) for clean energy-related applications including methane storage, hydrogen storage, and carbon dioxide capture; 2) The genetic incorporation of unnatural amino acids into proteins and labeling of proteins with small molecule probes. 

Dr. Shaoyang Liu

Dr. Shaoyang Liu

Professor of Chemistry
番茄社区
130 Center for Materials and Manufacturing Sciences (CMMS)
Troy, AL 36082


lius@troy.edu
Telephone: 334-808-6556

He received his B.S. in Applied Chemistry and later earned his Ph.D. in Analytical Chemistry at the University of Science and Technology of China (USTC). After graduation, he worked as a postdoctoral researcher and later as a Research Fellow at Auburn University. In 2012, he joined the faculty at 番茄社区. His research endeavors are primarily centered on the application of diverse advanced analytical instruments in the realms of plastic recycling and the development of innovative materials. 

Dr. Mojtaba Enayati

Dr. Mojtaba Enayati

Assistant Professor of Chemistry
番茄社区
129 Center for Materials and Manufacturing Sciences (CMMS)
Troy, AL 36082


menayati@troy.edu
Telephone: 334-670-3577

Dr. Enayati received his Ph.D. in polymer chemistry from the University of Tehran. After graduation, he worked for 5 years as an assistant professor. He then joined the University of Pennsylvania as a postdoctoral research associate (2015-2017), followed by another postdoc and a senior research associate position at Cornell University (2017-2020). His research was focused on controlled (living) radical polymerizations, surface-initiated Cu(0)-mediated reversible-deactivation radical polymerization (Cu(0)-RDRP), synthesis and characterization of polymer beads and ion-exchange resins, microencapsulation of active ingredients, and waste to value-added products. By joining 番茄社区 in 2021, his research is mainly focused on 鈥減olymer recycling鈥. 

Dr. Arun Ghosh

Dr. Arun Ghosh

Assistant Professor of Chemistry
番茄社区
122 Center for Materials and Manufacturing Sciences (CMMS)
Troy, AL 36082


aghosh@troy.edu
Telephone: 334-808-6758

Dr. Arun Ghosh is an Assistant Professor and scientist in the Center for Materials & Manufacturing Sciences at 番茄社区, AL. He has obtained his PhD in polymer/rubber technology from the Indian Institute of Technology Kharagpur and has about 20 years of experience in polymers and allied materials including polymer recycling, forest biomaterials, protein biomaterials, natural fiber and textiles, nanocomposites, adhesion and coating technology, and rubber technology. Dr. Ghosh has published over 40 research articles in international journals as a leading author and prepared numerous technical reports for industries. Before joining 番茄社区 in 2019, Dr. Ghosh worked as post-doctoral fellow and scientist in various organizations including the University of Tennessee Knoxville (Oak Ridge National Lab), AgResearch New Zealand, Case Western Reserve University, and the University of Toronto, and was a visiting scientist at Zhejiang University. 

Amanda Kennell

Dr. Amanda Kennell

Assistant Professor of Physics
番茄社区
121 Center for Materials and Manufacturing Sciences (CMMS)
Troy, AL 36082

akennell@troy.edu 
Telephone: 334-808-6759

Dr. Kennell received her PhD in physics from the University of Alabama at Birmingham.  Her research is multifaceted in material fabrication through nanofibers and study of the material's properties and behavior in a physiological environment.  Dr. Kennell's research interests are in electrohydrodynamics, tissue engineering, biomechanical engineering, and filtration.   

Aboulfazl Barati staff photo

Dr. Aboulfazl Barati

Assistant Professor of Chemistry
番茄社区
119 Center for Materials and Manufacturing Sciences (CMMS)
Troy, AL 36082


abarati@troy.edu 
Telephone: 334-670-5939

He earned his bachelor's degree in chemical engineering from the Petroleum University of Technology (Iran), and later his Master and Ph.D. in Chemical (Polymer) Engineering at the Tarbiat Modares University (Iran). His educational background, graduate, and postgraduate training and research represents his expertise in polymer science and engineering, recycling and sustainability, and process-structure-property relationships. Dr. Barati commenced his role as a postdoctoral research associate at 番茄社区 in June 2022. In 2024, he joined the faculty at 番茄社区. Currently, his research interest is focused on developing new methods for recycling/upcycling of polymer materials. This involves exploring various facets, such as processing, characterization, and application of synthetic, natural, and hybrid (composite) polymers. 

Troy Logo in replacement of Dr. Brooke Otten's faculty photo

Dr. Brooke Otten

Assistant Professor of Chemistry
番茄社区
002B Center for Materials and Manufacturing Sciences (CMMS)
Troy, AL 36082

botten@troy.edu
Telephone: 334-670-3576

Dr. Otten received her Bachelor and PhD in Chemistry from the University of North Texas. After graduation she worked as a visiting assistant professor at Vassar College in New York. Dr. Otten joined 番茄社区 in August 2021. Her research interest include catalytic and structural studies of Au(I) compounds through both computational and experimental means. 

Dr. Shaimum Shahriar

Dr. Shaimum Shahriar

Assistant Professor of Electronics Engineering Technology
Department of Chemistry and Physics
番茄社区
University Park, 518 S Brundidge St, Suite #120, Room #101A
Troy, AL 36081

sshahriar@troy.edu
Telephone: 334-808-6723

 

Dr. Shaimum Shahriar is an Assistant Professor in the Electronics Engineering Technology Program at 番茄社区. He earned his Ph.D. in Electrical and Computer Engineering from The University of Texas at El Paso in December 2019, where his research focused on organic-inorganic halide perovskite solar cells. He specialized in the fabrication and characterization of perovskite thin films and planar solar cells. Prior to joining the Department of Chemistry and Physics at 番茄社区 in Fall 2023, Dr. Shahriar worked as a Post-Doctoral Scholar researching bioinspired spatially varying photonic crystals (SVPCs) for chemical warfare agent (CWA) sensors. These structures were created using multi-photon lithography (MPL) to emulate natural nanophotonic structures. His current research interests include flexible solar cells, energy-harvesting materials and technologies, nano-mechanical energy harvesting, and photonic sensors. 

Dena Byars

Dena G Byars

Assistant to the Director
番茄社区
321C McCall Hal (MSCX)
Troy, AL 36082

dbyars@troy.edu
Telephone: 334-808-6721

Troy Logo in replacement of Emily Sustarich's faculty photo

Emily Sustarich

Laboratory Technician
番茄社区
002A Center for Materials and Manufacturing Sciences (CMMS)
Troy, AL 36082

esustarich@troy.edu
cmmslabtech@troy.edu
Telephone: 334-670-3574

Cookie Acknowledgment
This website uses cookies to collect information and to improve your browsing experience. Please review our privacy statement for more information.